bench desk electric height adjustment, single-motor frame Ogi Drive Bench

Bench desk electric height adjustment, single-motor frame Ogi Drive Bench

Product details

• Product features
• • Compliance with the PN-EN 527-2+A1:2019-08 standard guarantees that the desk is safe;
  • The single-motor version offers the same functionality as the standard Ogi Drive versions at a lower cost; its dimensions and available finishes are consistent with the dual-motor version;
  • The electric frame with height adjustment in the range of 720-1190 mm allows you to adjust the desk to your individual needs and work in sit-stand mode, which is healthier for the user;
  • The electric frame is protected against overload and overheating to avoid damage and injury and equipped with one of the most quiet motors on the market, only 48 dB;
  • The possibility to choose the size of the worktop makes it easy to adapt the desk to an existing or planned arrangement and the needs of users;
  • Accessories, such as mediaboxes, grommets, hangers, organisers and panels, help create an ergonomic and functional workstation;
  • Designed for various working spaces: traditional offices, coworks, hot-desk spaces, as well as public interiors, e.g. universities
• FAQ

• How long is the power cable?

  The length of the cable is 2 m.

  
  

  How to use various functions of the desk’s control panel?

  Below you can find video instructions for the most common functions of the PRO control panel:

  a. Restoring factory settings ▶ Instructional video (0:28)

  b. Saving worktop positions and memory operations ▶ Instructional video (0:35)

  c. Locking and unlocking ▶ Instructional video (0:25)

  d. Setting the sensitivity of the anti-collision system ▶ Instructional video (0:30)

  e. Activation of the One Touch Go function ▶ Instructional video (0:36)

  
  

  What should I do if the desk rises unevenly?

  Check if the control panel is installed correctly and correct its installation if needed. You can check how to correctly install the panel in the assembly manuals: Assembly manuals single motor frame

  
  

  What should I do if the control panel does not work properly?

  If the control panel does not work as it should, check the error code and apply appropriate solution. Most common error is:

  E05 – displays if the table/desk is blocked. Make sure that the desk/table is not blocked by any obstacle and that the control panel is fixed correctly. Correct the mounting of the control panel if necessary. Release the button and reset the desk.

  HOT – this is a software protection against engine overheating. Wait a few minutes and the message will disappear after some time.

  Other error codes of the control panel and their solutions can be found in the manual: Assembly manuals single motor frame

  
  

  Why is the desk less stable in the highest position than in the lowest one?

  A desk raised to the highest position will not be as stable as in the lowest position due to the telescopic design of its frame. This design allows the tabletop to move up and down. To be able to safely raise the top to its maximum height, place the desk on a flat surface during initial assembly. If necessary, adjust the position of the desk using the levelling feet, which are adjustable within 5 mm.

  
  

  The desk is raising or lowering on its own, what should I do?

  An arbitrary rise or fall of a tabletop can occur when too many other devices are connected to the same power supply as the desk. Overloading the power supply can cause short circuits and thus arbitrary movements of the tabletop. To avoid this, do not connect too many devices to the power supply unit to which your desk is connected.

  
  

  What should I do if there is oil leaking from the frame?

  There are friction points in the desk’s legs which are lubricated with oil during initial assembly at the factory. This ensures that they function properly. Leakage can occur if too much oil has been applied. It is sufficient to wipe off the dripping excess with a cloth. If the problem persists, contact our Customer Service to replace the frame.

  
  

  What does a sound coming from the legs or controller when the desk is stationary mean?

  A sound coming from the desk when it is not in the process of raising/lowering the desk top probably means that the electrical components (motor, controller or control panel) of the desk are overloaded. If there are lifts or photovoltaic systems installed in the building, these can affect the electrical system of the desk and cause it to sound. In a situation when a desk makes a self-contained sound:

  a. sure that the correct control panel is connected to the model of your desk;

  b. make sure that the voltage in the socket to which the desk is connected is appropriate (it should not exceed +/- 40V from the nominal voltage, i.e. 110V for a single-motor desk);

  c.check that the electrical components of the desk (motor, controller, control panel) are not damaged or worn out.

  If all these items are correct and the problem persists, contact our Customer Service:

  a. if the order included assembly our assembly team will arrive to replace the faulty part;

  b. if the order did not include assembly, Customer Service will send a dispatch with instructions on how to replace the part - an assembly service is available for an additional charge;

  c. if, after replacing the faulty part with a new one, the above-mentioned problem persists, it is possible to have the entire desk checked at the factory by our fitters. If the desk is checked and found to be free of defects, the customer shall bear the transport costs (collection and re-dispatch).

  
  
• Technical Data
• • Worktop - MFC 28 mm, ABS edge 2 mm;
  • Single-motor frame - electric height adjustment in the range of 720−1190 mm, steel, powder-coated, telescopic leg, 2 profiles 55 × 55 mm and 60 × 60 mm; extends the profiles by means of a metal connector under the worktop; maximum load on the desk is 100 kg at the minimum height of the tabletop and 30 kg at its maximum height;
  • Control panel (single-motor frame) - up and down keypad with memory; the ability to change the sensitivity of the anti-collision system within 3 levels: Low, Medium, High;
  • Technical specification of the frame: height adjustment - 40 mm/sec Super Soft Start-Stop, drive - 2 synchronised motors with microprocessor, work control sensor, noise level - < 48dB, anti-colision mechanism, Standards - EN 527-2, EU Directives - 206/95EC, UI508 1999, UL 1004 R7 06, WE DC 2004/108WE, power supply - 230V, 300W, power consumption on Standby - 0.3W;
  • Foot - Basic - powder-coated metal or Pro (option with extra charge) - aluminum, powder-coated or polished; levelling feet - range 5 mm;
  • Options with extra charge: grommet - 2 pcs, Ø 88 mm; mediabox M14H - plastic frame, 2 x RJ45 (class E, cat. 6); + 1 x USB + 1 x HDMI + 4 x 230V, dimensions: 305x155x150 mm, power cord: 2000 mm; mediabox M14 - plastic frame, 2 x RJ45 (class E, cat. 6); + 1 x USB + 4 x 230V, dimensions: 305x155x150 mm, power cord: 2000 mm; mediabox M071 - 1 x 230V + 1 x USB A charger + 1 x USB C charger, colours: black or white, mounted instead of the existing grommet Ø88 mm (PK80); top access M15 - plastic frame, dimensions: 292x112x18 mm; mediabox M04 - aluminium frame, 4 x 230V, 2 x RJ45, 1 x USB, power cord 2 m; mediabox M04H - aluminium frame, 4 x 230V, 2 x RJ45, 1 x USB, 1 x HDMI, power cord 2 m; top access M05 - aluminium frame;
  • Edges can be attached using laser technology or PUR glue - please contact Customer Service if tender or project guidelines require laser edging;
  • Made in Poland, EU
• Downloads

• Photos

  Lookbook

  Catalogue

  Safety rules

• Finishes
• Instructions

• Assembly manuals single motor frame

  Maintenace instruction

• Sustainability
• Material composition & packaging

  • MFC: 48%
  • Steel: 46%
  • Plastic: 2%
  • Cardboard: 4%

  *average values for a representative of the group.

  Carbon footprint

  56,5 kg

  Recycled content

  43%

  Recyclability

  • Recycling: 50%
  • Downcycling: 50%

  *average values for a representative of the group.

  Certificates

  • Environmental Product Declaration Type III
  • FSC/PEFC

  

  

  

  • Testing of formaldehyde emission by the chamber method according to EN 717- 1:2006 standard.
  • Test of volatile organic compounds (VOC) emission by the chamber method according to PN-EN ISO 16000-9.
  • PN-EN 15371:2016-12. Furniture. Strength, durability and safety. Requirements for non-domestic tables.

  Sustainable production

  • VOC Testing – we make sure that our furniture is safe for both the environment and the users. Ogi desks are tested for the presence of Volatile Organic Compounds using the chamber method in accordance with PN-EN ISO 16000-9.
  • Formaldehyde Testing – to meet the highest standards, we are constantly improving our production methods and the raw materials used. The levels of formaldehyde emission in our desks are now significantly below the requirements in accordance with the PN-EN 717-1:2006.
  • Safety, strength and durability – we believe in creating durable and timeless furniture. All desks in the Ogi family comply with the PN-EN 527-2+A1:2019-08.
  • Sustainable production – we are not indifferent to the environmental impact of our furniture, therefore we provide the essential information on the life cycle of Ogi desks through the Environmental Product Declaration (EPD).

  
  See more

  Packaging

  Materials: cardboard

  Recyclability: 100%

• Compliance with the PN-EN 527-2+A1:2019-08 standard guarantees that the desk is safe;
• The single-motor version offers the same functionality as the standard Ogi Drive versions at a lower cost; its dimensions and available finishes are consistent with the dual-motor version;
• The electric frame with height adjustment in the range of 720-1190 mm allows you to adjust the desk to your individual needs and work in sit-stand mode, which is healthier for the user;
• The electric frame is protected against overload and overheating to avoid damage and injury and equipped with one of the most quiet motors on the market, only 48 dB;
• The possibility to choose the size of the worktop makes it easy to adapt the desk to an existing or planned arrangement and the needs of users;
• Accessories, such as mediaboxes, grommets, hangers, organisers and panels, help create an ergonomic and functional workstation;
• Designed for various working spaces: traditional offices, coworks, hot-desk spaces, as well as public interiors, e.g. universities

How long is the power cable?

The length of the cable is 2 m.

How to use various functions of the desk’s control panel?

Below you can find video instructions for the most common functions of the PRO control panel:

a. Restoring factory settings ▶ Instructional video (0:28)

b. Saving worktop positions and memory operations ▶ Instructional video (0:35)

c. Locking and unlocking ▶ Instructional video (0:25)

d. Setting the sensitivity of the anti-collision system ▶ Instructional video (0:30)

e. Activation of the One Touch Go function ▶ Instructional video (0:36)

What should I do if the desk rises unevenly?

Check if the control panel is installed correctly and correct its installation if needed. You can check how to correctly install the panel in the assembly manuals: Assembly manuals single motor frame

What should I do if the control panel does not work properly?

If the control panel does not work as it should, check the error code and apply appropriate solution. Most common error is:

E05 – displays if the table/desk is blocked. Make sure that the desk/table is not blocked by any obstacle and that the control panel is fixed correctly. Correct the mounting of the control panel if necessary. Release the button and reset the desk.

HOT – this is a software protection against engine overheating. Wait a few minutes and the message will disappear after some time.

Other error codes of the control panel and their solutions can be found in the manual: Assembly manuals single motor frame

Why is the desk less stable in the highest position than in the lowest one?

A desk raised to the highest position will not be as stable as in the lowest position due to the telescopic design of its frame. This design allows the tabletop to move up and down. To be able to safely raise the top to its maximum height, place the desk on a flat surface during initial assembly. If necessary, adjust the position of the desk using the levelling feet, which are adjustable within 5 mm.

The desk is raising or lowering on its own, what should I do?

An arbitrary rise or fall of a tabletop can occur when too many other devices are connected to the same power supply as the desk. Overloading the power supply can cause short circuits and thus arbitrary movements of the tabletop. To avoid this, do not connect too many devices to the power supply unit to which your desk is connected.

What should I do if there is oil leaking from the frame?

There are friction points in the desk’s legs which are lubricated with oil during initial assembly at the factory. This ensures that they function properly. Leakage can occur if too much oil has been applied. It is sufficient to wipe off the dripping excess with a cloth. If the problem persists, contact our Customer Service to replace the frame.

What does a sound coming from the legs or controller when the desk is stationary mean?

A sound coming from the desk when it is not in the process of raising/lowering the desk top probably means that the electrical components (motor, controller or control panel) of the desk are overloaded. If there are lifts or photovoltaic systems installed in the building, these can affect the electrical system of the desk and cause it to sound. In a situation when a desk makes a self-contained sound:

a. sure that the correct control panel is connected to the model of your desk;

b. make sure that the voltage in the socket to which the desk is connected is appropriate (it should not exceed +/- 40V from the nominal voltage, i.e. 110V for a single-motor desk);

c.check that the electrical components of the desk (motor, controller, control panel) are not damaged or worn out.

If all these items are correct and the problem persists, contact our Customer Service:

a. if the order included assembly our assembly team will arrive to replace the faulty part;

b. if the order did not include assembly, Customer Service will send a dispatch with instructions on how to replace the part - an assembly service is available for an additional charge;

c. if, after replacing the faulty part with a new one, the above-mentioned problem persists, it is possible to have the entire desk checked at the factory by our fitters. If the desk is checked and found to be free of defects, the customer shall bear the transport costs (collection and re-dispatch).

• Worktop - MFC 28 mm, ABS edge 2 mm;
• Single-motor frame - electric height adjustment in the range of 720−1190 mm, steel, powder-coated, telescopic leg, 2 profiles 55 × 55 mm and 60 × 60 mm; extends the profiles by means of a metal connector under the worktop; maximum load on the desk is 100 kg at the minimum height of the tabletop and 30 kg at its maximum height;
• Control panel (single-motor frame) - up and down keypad with memory; the ability to change the sensitivity of the anti-collision system within 3 levels: Low, Medium, High;
• Technical specification of the frame: height adjustment - 40 mm/sec Super Soft Start-Stop, drive - 2 synchronised motors with microprocessor, work control sensor, noise level - < 48dB, anti-colision mechanism, Standards - EN 527-2, EU Directives - 206/95EC, UI508 1999, UL 1004 R7 06, WE DC 2004/108WE, power supply - 230V, 300W, power consumption on Standby - 0.3W;
• Foot - Basic - powder-coated metal or Pro (option with extra charge) - aluminum, powder-coated or polished; levelling feet - range 5 mm;
• Options with extra charge: grommet - 2 pcs, Ø 88 mm; mediabox M14H - plastic frame, 2 x RJ45 (class E, cat. 6); + 1 x USB + 1 x HDMI + 4 x 230V, dimensions: 305x155x150 mm, power cord: 2000 mm; mediabox M14 - plastic frame, 2 x RJ45 (class E, cat. 6); + 1 x USB + 4 x 230V, dimensions: 305x155x150 mm, power cord: 2000 mm; mediabox M071 - 1 x 230V + 1 x USB A charger + 1 x USB C charger, colours: black or white, mounted instead of the existing grommet Ø88 mm (PK80); top access M15 - plastic frame, dimensions: 292x112x18 mm; mediabox M04 - aluminium frame, 4 x 230V, 2 x RJ45, 1 x USB, power cord 2 m; mediabox M04H - aluminium frame, 4 x 230V, 2 x RJ45, 1 x USB, 1 x HDMI, power cord 2 m; top access M05 - aluminium frame;
• Edges can be attached using laser technology or PUR glue - please contact Customer Service if tender or project guidelines require laser edging;
• Made in Poland, EU

Photos

Lookbook

Catalogue

Safety rules

Assembly manuals single motor frame

Maintenace instruction

Material composition & packaging

• MFC: 48%
• Steel: 46%
• Plastic: 2%
• Cardboard: 4%

*average values for a representative of the group.

Carbon footprint

56,5 kg

Recycled content

43%

Recyclability

• Recycling: 50%
• Downcycling: 50%

*average values for a representative of the group.

Certificates

• Environmental Product Declaration Type III
• FSC/PEFC

• Testing of formaldehyde emission by the chamber method according to EN 717- 1:2006 standard.
• Test of volatile organic compounds (VOC) emission by the chamber method according to PN-EN ISO 16000-9.
• PN-EN 15371:2016-12. Furniture. Strength, durability and safety. Requirements for non-domestic tables.

Sustainable production

• VOC Testing – we make sure that our furniture is safe for both the environment and the users. Ogi desks are tested for the presence of Volatile Organic Compounds using the chamber method in accordance with PN-EN ISO 16000-9.
• Formaldehyde Testing – to meet the highest standards, we are constantly improving our production methods and the raw materials used. The levels of formaldehyde emission in our desks are now significantly below the requirements in accordance with the PN-EN 717-1:2006.
• Safety, strength and durability – we believe in creating durable and timeless furniture. All desks in the Ogi family comply with the PN-EN 527-2+A1:2019-08.
• Sustainable production – we are not indifferent to the environmental impact of our furniture, therefore we provide the essential information on the life cycle of Ogi desks through the Environmental Product Declaration (EPD).

See more

Packaging

Materials: cardboard

Recyclability: 100%